Idea
In short
How do you build a seedling heat mat controller?
A thermostat for a heat mat keeps seedlings at 25 °C with a safe over-temperature cut-off. You need Arduino Nano, DS18B20 waterproof probe, Solid state relay module 2-channel (G3MB-202P) and SSD1306 OLED Display.
- Level
- Beginner
- Time
- About 90 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a heater.
Parts list
- Development Boards
- Sensors
- Interfaces
- Displays
How to build it
- Read the soil temperature
- Switch the mat on and off with hysteresis
- Cut off at 35 °C
- Log
- Use a certified mat
Common questions
What parts do I need for the seedling heat mat controller?
Arduino Nano, DS18B20 waterproof probe, Solid state relay module 2-channel (G3MB-202P) and SSD1306 OLED Display.
How long does the seedling heat mat controller take to build?
About 90 minutes for a beginner maker.
