Projects / Ideas / Standby power finder

Standby power finder

IntermediateSmart HomeIdeaReviewed
In short

How do you build a standby power finder?

A plug-in style meter shows how many watts a TV, set-top box and charger use while off, and what that costs a year. You need ESP32 DevKit V1, PZEM-004T energy meter module, SSD1306 OLED Display and ABS project box (100 × 60 × 25 mm).

Level
Intermediate
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure small AC loads accurately and turn watts into rupees.

How to build it

  1. Build the PZEM into a closed box with a socket, wired by a qualified person
  2. Measure each appliance on and on standby
  3. Multiply standby watts by 8,760 hours
  4. Multiply by your tariff per unit
  5. Make a list of what to switch off at the wall

Related projects

Common questions

What parts do I need for the standby power finder?

ESP32 DevKit V1, PZEM-004T energy meter module, SSD1306 OLED Display and ABS project box (100 × 60 × 25 mm).

How long does the standby power finder take to build?

About 120 minutes for a intermediate maker.