Idea
In short
How do you build a glider vario beeper?
An MS5611 senses small height changes from pressure and a buzzer beeps faster as you climb, like the instrument in a paraglider. You need Arduino Nano, MS5611 barometric pressure sensor, Passive buzzer, 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Turn tiny pressure changes into a vertical speed and a sound.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Batteries
- Power
How to build it
- Read pressure and temperature
- Convert the pressure to height
- Smooth it and take the change per second
- Beep faster when rising and tone down when sinking
- Test by walking up and down stairs
Common questions
What parts do I need for the glider vario beeper?
Arduino Nano, MS5611 barometric pressure sensor, Passive buzzer, 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
How long does the glider vario beeper take to build?
About 150 minutes for a intermediate maker.
