Idea
In short
How do you build a variometer climb beeper?
A fast pressure sensor beeps higher when you climb and lower when you descend, as used for gliders. You need Arduino Nano, MS5611 barometric pressure sensor, Passive buzzer, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 330 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Estimate vertical speed from pressure.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Displays
- Prototyping
How to build it
- Read pressure quickly
- Smooth it
- Compute vertical speed
- Map speed to a beep tone
- Test on a staircase
Common questions
What parts do I need for the variometer climb beeper?
Arduino Nano, MS5611 barometric pressure sensor, Passive buzzer, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the variometer climb beeper take to build?
About 330 minutes for a advanced maker.
