Idea
In short
How do you build an altitude and pressure logger?
A fine pressure sensor logs air pressure and altitude changes, such as a flight of stairs, to an SD card. You need Arduino Nano, MS5611 barometric pressure sensor, SSD1306 OLED Display, MicroSD Card Module and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Log pressure and height.
Parts list
- Development Boards
- Sensors
- Displays
- Interfaces
- Prototyping
How to build it
- Wire the sensor
- Read pressure
- Convert to height
- Log each second
- Walk up some stairs and plot
Common questions
What parts do I need for the altitude and pressure logger?
Arduino Nano, MS5611 barometric pressure sensor, SSD1306 OLED Display, MicroSD Card Module and Breadboard 830 Tie Points.
How long does the altitude and pressure logger take to build?
About 210 minutes for a intermediate maker.
