Idea
In short
How do you build an AI waste sorting bin?
A camera in a bin lid classifies plastic, paper and food waste and a servo opens the right flap. You need Raspberry Pi 5, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply, Raspberry Pi Camera Module 3, MG996R metal gear servo × 2 and 5 V 2 A USB adapter.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Deploy a classifier into a physical product.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- SBC Accessories
- Motors & Actuators
- Power
How to build it
- Collect photos of each waste type
- Train a classifier
- Trigger when an item is held over the lid
- Open the right flap
- Count items for a recycling report
Common questions
What parts do I need for the AI waste sorting bin?
Raspberry Pi 5, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply, Raspberry Pi Camera Module 3, MG996R metal gear servo × 2 and 5 V 2 A USB adapter.
How long does the AI waste sorting bin take to build?
About 480 minutes for a advanced maker.
