Idea
In short
How do you build a delta robot model?
Three servos move a platform in X, Y and Z using delta robot kinematics. You need Arduino Uno R3, MG996R metal gear servo × 3, PCA9685 16-channel servo driver and 5 V 2 A USB adapter.
- Level
- Advanced
- Time
- About 600 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Solve inverse kinematics for a delta robot.
Parts list
- Development Boards
- Motors & Actuators
- Motor Drivers
- Power
How to build it
- Print the arms
- Mount three servos
- Write inverse kinematics
- Move in a square
- Add a suction pick-up
Common questions
What parts do I need for the delta robot model?
Arduino Uno R3, MG996R metal gear servo × 3, PCA9685 16-channel servo driver and 5 V 2 A USB adapter.
How long does the delta robot model take to build?
About 600 minutes for a advanced maker.
