Components / Integrated circuits / MCP2515 CAN controller

MCP2515 CAN controller

Standalone CAN controller over SPI, usually paired with a TJA1050.

FunctionCAN 2.0B controller
Supply voltage2.7 to 5.5 V
Inputs and outputsSPI
PackageDIP-18
Integrated CircuitsReviewedMPN MCP2515-I/PUsed in 1 project
MCP2515
In short

What is the MCP2515 CAN controller and what is it used for?

Standalone CAN controller over SPI, usually paired with a TJA1050. Makers use it for car and machine CAN bus.

How it works

A CAN 2.0B protocol controller with filters and buffers, controlled over SPI.

Key specifications

Integrated circuit specValue
FunctionCAN 2.0B controller
Supply voltage2.7 to 5.5 V
Inputs and outputsSPI
PackageDIP-18

Pinout

1TXCAN
2RXCAN
3CLKOUT
4to 6TX0RTS to TX2RTS
7and 8OSC2 and OSC1 crystal
9VSS
10and 11RX1BF and RX0BF
12INT
13SCK
14SI
15SO
16CS
17RESET
18VDD

How to use it

Pair it with a TJA1050 or MCP2551 transceiver (most modules include both). Tell the library the crystal frequency on your module (often 8 MHz) or the bit rate will be wrong.

Applications

Alternatives

Buy at

Common questions

What is the MCP2515 CAN controller used for?

In maker projects: car and machine CAN bus.

How does the MCP2515 CAN controller work?

A CAN 2.0B protocol controller with filters and buffers, controlled over SPI.

What voltage does the MCP2515 CAN controller need?

2.7 to 5.5 V.

What can I use instead of the MCP2515 CAN controller?

TJA1050 CAN transceiver.