Idea
In short
How do you build a car OBD-II dashboard?
An ESP32 reads speed, RPM and coolant temperature from a car's OBD-II port over CAN and shows them on a TFT. You need ESP32 DevKit V1, MCP2515 CAN bus module, 2.8 inch TFT touch (ILI9341, SPI), LM2596 Buck Module and Blade fuse with inline holder (car type).
- Level
- Advanced
- Time
- About 360 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read real vehicle data over the CAN bus.
Parts list
- Development Boards
- Interfaces
- Displays
- Power
- Passives
How to build it
- Find CAN high and low on the OBD-II plug
- Set the MCP2515 to 500 kbit/s
- Send standard PID requests
- Decode the replies into values
- Fuse the 12 V feed and only read, never write
Common questions
What parts do I need for the car OBD-II dashboard?
ESP32 DevKit V1, MCP2515 CAN bus module, 2.8 inch TFT touch (ILI9341, SPI), LM2596 Buck Module and Blade fuse with inline holder (car type).
How long does the car OBD-II dashboard take to build?
About 360 minutes for a advanced maker.
