L298N motor driver IC
The dual H-bridge chip on L298N modules.
FunctionDual full H-bridge
Supply voltageUp to 46 V motor, 5 V logic
Inputs and outputs4 inputs, 2 enables
SpeedUp to about 25 kHz PWM
Integrated CircuitsReviewedMPN L298NUsed in 1 project
In short
What is the L298N motor driver IC and what is it used for?
The dual H-bridge chip on L298N modules. Makers use it for custom motor driver PCBs.
How it works
Two bipolar H-bridges that reverse the current through a motor.
Key specifications
| Integrated circuit spec | Value |
|---|---|
| Function | Dual full H-bridge |
| Supply voltage | Up to 46 V motor, 5 V logic |
| Inputs and outputs | 4 inputs, 2 enables |
| Speed | Up to about 25 kHz PWM |
| Package | Multiwatt-15 |
| Watch out for | About 2 V lost in the bridge; needs external flyback diodes |
Pinout
1Current sense A
2Output 1
3Output 2
4VS, motor supply
5Input 1
6Enable A
7Input 2
8GND
9VSS, 5 V logic
10Input 3
11Enable B
12Input 4
13Output 3
14Output 4
15Current sense B
How to use it
Usually used on the red L298N module. Needs external flyback diodes on the bare chip. It drops about 2 to 3 V, so a 12 V supply gives the motor only 9 to 10 V and the chip gets hot. For small motors, a TB6612FNG or DRV8833 wastes much less.
Applications
Custom motor driver PCBs
Builds that use it
Alternatives
- TB6612FNG Motor DriverEfficient MOSFET driver for small motors
- DRV8833 dual motor driverLow-voltage MOSFET driver
Common questions
What is the L298N motor driver IC used for?
In maker projects: custom motor driver PCBs.
How does the L298N motor driver IC work?
Two bipolar H-bridges that reverse the current through a motor.
What voltage does the L298N motor driver IC need?
Up to 46 V motor, 5 V logic.
What can I use instead of the L298N motor driver IC?
TB6612FNG Motor Driver and DRV8833 dual motor driver.
