Idea
In short
How do you build a number plate reader on Jetson?
A Jetson finds number plates in video and reads the text for a gated society's visitor log. You need NVIDIA Jetson Orin Nano Super Developer Kit, IMX219 camera for Jetson Nano and Orin, NVMe SSD 256 GB (M.2 2230/2242), IR LED 850 nm (night vision) × 4 and Relay Module 5V.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Chain detection and text recognition models.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- OptoelectronicsFor plates at night
- InterfacesOpens the gate
How to build it
- Detect plates with a trained model
- Crop and straighten each plate
- Read the text with an OCR model
- Match against an allowed list
- Store only what the policy allows
Common questions
What parts do I need for the number plate reader on Jetson?
NVIDIA Jetson Orin Nano Super Developer Kit, IMX219 camera for Jetson Nano and Orin, NVMe SSD 256 GB (M.2 2230/2242), IR LED 850 nm (night vision) × 4 and Relay Module 5V. IR LED 850 nm (night vision) × 4: For plates at night. Relay Module 5V: Opens the gate.
How long does the number plate reader on Jetson take to build?
About 480 minutes for a advanced maker.
