Idea
In short
How do you build a factory defect detection on Jetson?
A Jetson inspects parts on a conveyor and flags scratched or missing pieces with a custom-trained model. You need NVIDIA Jetson Orin Nano Super Developer Kit, IMX219 camera for Jetson Nano and Orin, Relay Module 5V and 10 W COB LED (12 V).
- Level
- Advanced
- Time
- About 600 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Train a model on your own images and deploy it.
Parts list
- Single Board Computers
- SBC Accessories
- Interfaces
- Optoelectronics
How to build it
- Light the inspection area evenly
- Collect good and bad samples
- Train a detection model
- Optimise it with TensorRT
- Trigger a reject relay on a defect
Common questions
What parts do I need for the factory defect detection on Jetson?
NVIDIA Jetson Orin Nano Super Developer Kit, IMX219 camera for Jetson Nano and Orin, Relay Module 5V and 10 W COB LED (12 V).
How long does the factory defect detection on Jetson take to build?
About 600 minutes for a advanced maker.
