Idea
In short
How do you build an exercise form coach on Jetson?
A Jetson tracks body pose from a camera, counts squats and warns when knees go too far forward. You need NVIDIA Jetson Orin Nano Super Developer Kit, IMX219 camera for Jetson Nano and Orin and NVMe SSD 256 GB (M.2 2230/2242).
- Level
- Advanced
- Time
- About 300 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use pose estimation and turn joints into rules.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
How to build it
- Run a pose model with TensorRT
- Get hip, knee and ankle points
- Work out the knee angle
- Count reps from angle changes
- Show a warning on screen
Common questions
What parts do I need for the exercise form coach on Jetson?
NVIDIA Jetson Orin Nano Super Developer Kit, IMX219 camera for Jetson Nano and Orin and NVMe SSD 256 GB (M.2 2230/2242).
How long does the exercise form coach on Jetson take to build?
About 300 minutes for a advanced maker.
