P10 LED matrix panel (32x16, red)
Outdoor-bright LED panel used for shop and bus signs.
TypeLED matrix
Size320 × 160 mm
Resolution32 × 16
InterfaceHUB12
DisplaysReviewedMPN P10 redUsed in 4 projects
In short
What is the P10 LED matrix panel (32x16, red) and what is it used for?
Outdoor-bright LED panel used for shop and bus signs. Makers use it for scrolling notice boards.
How it works
Shift registers and row drivers scan 512 red LEDs at a 1/4 duty cycle.
Key specifications
| Display spec | Value |
|---|---|
| Type | LED matrix |
| Size | 320 × 160 mm |
| Resolution | 32 × 16 |
| Interface | HUB12 |
| Supply voltage | 5 V, about 2 A per panel |
Pinout
HUB1216-pin connector (OE A B CLK SCLK R GND)
Power5 V screw or plug terminals
How to use it
Use the DMD2 library on an Uno or an ESP32 library. Power every panel from a 5 V supply of about 2 A per panel. Chain panels output to input for larger signs.
Applications
Scrolling notice boards
Builds that use it
Alternatives
- HUB75 RGB LED matrix 64x32 (P4)Full colour
- MAX7219 8x8 LED matrix moduleSmall hobby matrix
Common questions
What is the P10 LED matrix panel (32x16, red) used for?
In maker projects: scrolling notice boards.
How does the P10 LED matrix panel (32x16, red) work?
Shift registers and row drivers scan 512 red LEDs at a 1/4 duty cycle.
What voltage does the P10 LED matrix panel (32x16, red) need?
5 V, about 2 A per panel.
How do I connect the P10 LED matrix panel (32x16, red) to an Arduino or ESP32?
HUB12. Pins: HUB12 (16-pin connector (OE A B CLK SCLK R GND)), Power (5 V screw or plug terminals).
What can I use instead of the P10 LED matrix panel (32x16, red)?
HUB75 RGB LED matrix 64x32 (P4) and MAX7219 8x8 LED matrix module.
