Idea
In short
How do you build a solar LoRa weather node?
A field weather node runs on a small solar panel and sends readings every 10 minutes over LoRa. You need Heltec WiFi LoRa 32 V3, BME280 Environmental Sensor, Solar panel 6 V 1 W, CN3065 solar Li-ion charger module, Li-Po battery 3.7 V 2000 mAh and Waterproof enclosure IP65 (junction box).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Design an off-grid node with a power budget.
Parts list
- Development Boards
- Sensors
- Power
- Power
- Batteries
- Mechanical & Hardware
How to build it
- Work out the daily energy budget
- Charge from the panel
- Wake, read, send and sleep
- Send battery voltage too
- Mount in a vented shield
Common questions
What parts do I need for the solar LoRa weather node?
Heltec WiFi LoRa 32 V3, BME280 Environmental Sensor, Solar panel 6 V 1 W, CN3065 solar Li-ion charger module, Li-Po battery 3.7 V 2000 mAh and Waterproof enclosure IP65 (junction box).
How long does the solar LoRa weather node take to build?
About 240 minutes for a intermediate maker.
