Components / Wireless / HM-10 BLE module

HM-10 BLE module

Bluetooth Low Energy serial module that works with iPhones.

RadioBluetooth 4.0 LE (CC2541)
Typical rangeAbout 10 to 30 m
InterfaceUART
Supply voltage3.3 V module, 3.6 to 6 V board
WirelessReviewedMPN HM-10Used in 2 projects
HM10
In short

What is the HM-10 BLE module and what is it used for?

Bluetooth Low Energy serial module that works with iPhones. Makers use it for BLE phone apps.

How it works

A TI CC2541 Bluetooth 4.0 LE chip running a serial-over-BLE service.

Key specifications

Wireless module specValue
RadioBluetooth 4.0 LE (CC2541)
Typical rangeAbout 10 to 30 m
InterfaceUART
Supply voltage3.3 V module, 3.6 to 6 V board

Pinout

VCC3.6 to 6 V on the breakout
GNDGround
TXDTo the board's RX
RXDFrom the board's TX (3.3 V)
STATEHigh when connected
BRKBreak connection

How to use it

It is Bluetooth LE, so classic Bluetooth terminal apps that work with an HC-05 will not find it. Use a BLE terminal app. Many clones (CC41-A, MLT-BT05) use different AT commands, so check the firmware with AT+VERSION.

Applications

Alternatives

Buy at

Common questions

What is the HM-10 BLE module used for?

In maker projects: BLE phone apps.

How does the HM-10 BLE module work?

A TI CC2541 Bluetooth 4.0 LE chip running a serial-over-BLE service.

What voltage does the HM-10 BLE module need?

3.3 V module, 3.6 to 6 V board.

How do I connect the HM-10 BLE module to an Arduino or ESP32?

UART. Pins: VCC (3.6 to 6 V on the breakout), GND (Ground), TXD (To the board's RX), RXD (From the board's TX (3.3 V)), STATE (High when connected), BRK (Break connection).

What can I use instead of the HM-10 BLE module?

HC-05 Bluetooth Module and ESP32-C3 SuperMini.