JDY-31 Bluetooth module
Low-cost Bluetooth Classic serial module, HC-05 alternative.
RadioBluetooth 3.0 SPP
InterfaceUART
Supply voltage3.6 to 6 V
WirelessReviewedMPN JDY-31Used in 2 projects
In short
What is the JDY-31 Bluetooth module and what is it used for?
Low-cost Bluetooth Classic serial module, HC-05 alternative. Makers use it for phone control.
How it works
A classic Bluetooth serial port profile module.
Key specifications
| Wireless module spec | Value |
|---|---|
| Radio | Bluetooth 3.0 SPP |
| Interface | UART |
| Supply voltage | 3.6 to 6 V |
Pinout
VCC3.6 to 6 V
GNDGround
TXDTo the board's RX
RXDFrom the board's TX (3.3 V)
STATEConnection status
ENEnable
How to use it
A drop-in for the HC-06: pair with PIN 1234 and talk at 9600 baud. AT commands need a line ending (CR LF).
Applications
Phone control
Builds that use it
Alternatives
- HC-06 Bluetooth moduleOriginal slave module
- HC-05 Bluetooth ModuleMaster and slave
Common questions
What is the JDY-31 Bluetooth module used for?
In maker projects: phone control.
How does the JDY-31 Bluetooth module work?
A classic Bluetooth serial port profile module.
What voltage does the JDY-31 Bluetooth module need?
3.6 to 6 V.
How do I connect the JDY-31 Bluetooth module to an Arduino or ESP32?
UART. Pins: VCC (3.6 to 6 V), GND (Ground), TXD (To the board's RX), RXD (From the board's TX (3.3 V)), STATE (Connection status), EN (Enable).
What can I use instead of the JDY-31 Bluetooth module?
HC-06 Bluetooth module and HC-05 Bluetooth Module.
