ESP32-C3 DevKitM-1
Espressif board for the RISC-V ESP32-C3 with Wi-Fi and Bluetooth LE.
MicrocontrollerESP32-C3 RISC-V 160 MHz
Flash4 MB
RAM400 KB
Logic level3.3 V
Development BoardsReviewedMPN ESP32-C3-DevKitM-1Used in 1 project
In short
What is the ESP32-C3 DevKitM-1 and what is it used for?
Espressif board for the RISC-V ESP32-C3 with Wi-Fi and Bluetooth LE. Makers use it for low-cost connected sensors.
How it works
Espressif's reference board for the single-core RISC-V ESP32-C3 with Wi-Fi and Bluetooth 5 LE.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | ESP32-C3 RISC-V 160 MHz |
| Flash | 4 MB |
| RAM | 400 KB |
| Logic level | 3.3 V |
| Wireless | Wi-Fi 2.4 GHz, Bluetooth 5 LE |
Pinout
GPIO8WS2812 RGB LED
GPIO9BOOT button
GPIO20 GPIO21UART0 RX TX (to the USB bridge)
GPIO0 to GPIO4ADC
5V 3V3 GNDPower
How to use it
Pick ESP32C3 Dev Module. Drive the RGB LED with neopixelWrite or the Adafruit NeoPixel library on GPIO8.
Applications
Low-cost connected sensors
Builds that use it
Alternatives
- ESP32-C3 SuperMiniSmaller and cheaper
- ESP32-C6 DevKitC-1Adds Wi-Fi 6, Zigbee and Thread
Common questions
What is the ESP32-C3 DevKitM-1 used for?
In maker projects: low-cost connected sensors.
How does the ESP32-C3 DevKitM-1 work?
Espressif's reference board for the single-core RISC-V ESP32-C3 with Wi-Fi and Bluetooth 5 LE.
What can I use instead of the ESP32-C3 DevKitM-1?
ESP32-C3 SuperMini and ESP32-C6 DevKitC-1.
