Idea
In short
How do you build a slow display turntable?
A continuous-rotation servo turns a small stand slowly, with a knob for speed and a button for direction. You need Arduino Nano, Continuous rotation servo (SG90 360°), Potentiometer 10 kΩ, Tactile push button 6 mm, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Turn a platform slowly.
Parts list
- Development Boards
- Motors & Actuators
- Passives
- Switches
- Power
- Prototyping
How to build it
- Calibrate the stop point
- Wire the knob
- Map to speed
- Add a direction button
- Add a timer
Related projects
Common questions
What parts do I need for the slow display turntable?
Arduino Nano, Continuous rotation servo (SG90 360°), Potentiometer 10 kΩ, Tactile push button 6 mm, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the slow display turntable take to build?
About 120 minutes for a beginner maker.
