Idea
In short
How do you build a pico sixteen-key code pad?
A Pico reads a TTP229 sixteen-key capacitive keypad and checks a typed code against a stored one, showing correct or wrong on an OLED. A learning demo, not a security lock. You need Raspberry Pi Pico H, Capacitive touch keypad (TTP229, 16 key), SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 140 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Enter a code on a touch keypad.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Wire the keypad on its serial pins
- Read the key number
- Collect the digits
- Compare with the stored code
- Show the result on the OLED
Common questions
What parts do I need for the pico sixteen-key code pad?
Raspberry Pi Pico H, Capacitive touch keypad (TTP229, 16 key), SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the pico sixteen-key code pad take to build?
About 140 minutes for a intermediate maker.
