Components / Sensors / APDS-9960 gesture, colour and proximity sensor

APDS-9960 gesture, colour and proximity sensor

Detects hand swipes, colour and nearby objects.

MeasuresGesture, RGB colour, ambient light, proximity
InterfaceI2C
I2C address0x39
Supply voltage2.4 to 3.6 V
SensorsReviewedMPN APDS-9960Used in 5 projects
APDS9960
In short

What is the APDS-9960 gesture, colour and proximity sensor and what is it used for?

Detects hand swipes, colour and nearby objects. Makers use it for gesture-controlled gadgets.

How it works

An IR LED and four directional photodiodes detect motion direction; extra filtered photodiodes measure colour.

Key specifications

Sensor specValue
MeasuresGesture, RGB colour, ambient light, proximity
InterfaceI2C
I2C address0x39
Supply voltage2.4 to 3.6 V

Pinout

VIN3.3 V (some modules accept 5 V)
GNDGround
SCLI2C clock
SDAI2C data
INTInterrupt, active low
VLIR LED supply (jumper on most boards)

How to use it

Use the SparkFun or Arduino APDS9960 library. Gestures work best with a hand passing 5 to 10 cm above the sensor. The chip runs at 3.3 V only.

Applications

Alternatives

Buy at

Common questions

What is the APDS-9960 gesture, colour and proximity sensor used for?

In maker projects: gesture-controlled gadgets.

How does the APDS-9960 gesture, colour and proximity sensor work?

An IR LED and four directional photodiodes detect motion direction; extra filtered photodiodes measure colour.

What voltage does the APDS-9960 gesture, colour and proximity sensor need?

2.4 to 3.6 V.

How do I connect the APDS-9960 gesture, colour and proximity sensor to an Arduino or ESP32?

I2C. Pins: VIN (3.3 V (some modules accept 5 V)), GND (Ground), SCL (I2C clock), SDA (I2C data), INT (Interrupt, active low), VL (IR LED supply (jumper on most boards)).

What can I use instead of the APDS-9960 gesture, colour and proximity sensor?

TCS34725 colour sensor.