ESP32 2.8 inch display board (CYD, ESP32-2432S028)
ESP32 with a 2.8 inch touch screen on one board, called the Cheap Yellow Display.
What is the ESP32 2.8 inch display board (CYD, ESP32-2432S028) and what is it used for?
ESP32 with a 2.8 inch touch screen on one board, called the Cheap Yellow Display. Makers use it for all-in-one touch dashboards.
An ESP32-WROOM module wired to a 2.8 inch ILI9341 TFT, an XPT2046 touch controller, an RGB LED and an SD slot.
Key specifications
| Display spec | Value |
|---|---|
| Type | Colour TFT with touch |
| Size | 2.8 inch |
| Resolution | 240 × 320 |
| Driver IC | ILI9341 + XPT2046 |
| Interface | Built in |
| Supply voltage | 5 V USB |
Pinout
How to use it
Known as the Cheap Yellow Display. Use TFT_eSPI with the ILI9341 driver and XPT2046_Touchscreen on its own SPI pins, or LVGL. Some revisions use a different controller, so check the community setup notes for your board.
Applications
Builds that use it
Alternatives
- LilyGO T-Display ESP32Smaller ESP32 screen board
- 2.8 inch TFT touch (ILI9341, SPI)Screen only
Common questions
What is the ESP32 2.8 inch display board (CYD, ESP32-2432S028) used for?
In maker projects: all-in-one touch dashboards.
How does the ESP32 2.8 inch display board (CYD, ESP32-2432S028) work?
An ESP32-WROOM module wired to a 2.8 inch ILI9341 TFT, an XPT2046 touch controller, an RGB LED and an SD slot.
What voltage does the ESP32 2.8 inch display board (CYD, ESP32-2432S028) need?
5 V USB.
How do I connect the ESP32 2.8 inch display board (CYD, ESP32-2432S028) to an Arduino or ESP32?
Built in. Pins: GPIO13 12 14 15 2 (TFT MOSI MISO SCK CS DC), GPIO21 (Backlight), GPIO25 32 39 33 36 (Touch CLK MOSI MISO CS IRQ), GPIO4 16 17 (RGB LED), GPIO34 (Light sensor), SD slot (microSD).
What can I use instead of the ESP32 2.8 inch display board (CYD, ESP32-2432S028)?
LilyGO T-Display ESP32 and 2.8 inch TFT touch (ILI9341, SPI).
