Top 10 IoT projects with ESP32, MQTT and cloud dashboards

The 10 best IoT projects to build: ThingSpeak weather logger, Google Sheets logger, MQTT to phone, Home Assistant sensors, Node-RED, LoRa link and energy meter, with guides.

In short

What are the best IoT projects?

An IoT project reads a sensor, sends the data over a network and shows it somewhere useful. The simplest are the ThingSpeak weather logger and the Google Sheets logger. Next learn MQTT, the messaging protocol most IoT systems use, then build dashboards in Home Assistant or Node-RED. LoRa gives long range without Wi-Fi.

Projects
10 guided builds
Levels
Beginner, Intermediate, Advanced
Build time
1 h to 3 h

The 10 projects

These ten cover the common IoT stack: cloud loggers, MQTT, dashboards, energy and water metering, LoRa radio and BLE room presence. Ordered from simplest cloud logging to more advanced networks.

  1. Cloud weather logger with ThingSpeak

    A NodeMCU sends temperature and humidity from a DHT11 to a free ThingSpeak channel every 20 seconds, where you see live charts.

    Intermediate1 hIoTOpen the build →
  2. Log sensor data to Google Sheets

    An ESP32 posts readings to a Google Apps Script, which adds a row to a sheet you can chart and share.

    Beginner1 hIoTOpen the build →
  3. Sensor to phone over MQTT

    An ESP32 publishes BME280 readings to an MQTT broker every 10 s, and a phone dashboard app shows them anywhere.

    Advanced1.3 hIoTOpen the build →
  4. ESPHome sensors in Home Assistant

    Write a YAML file, flash an ESP32 and a new sensor appears in Home Assistant with no code.

    Beginner1 hIoTOpen the build →
  5. Node-RED dashboard for sensors

    Node-RED on a Pi collects MQTT readings from ESP32 sensors and shows gauges and charts in a browser.

    Beginner2 hIoTOpen the build →
  6. Water use monitor

    A flow sensor on a garden or tank line counts litres and shows daily use and leaks on a web page.

    Intermediate2 hIoTOpen the build →
  7. Whole-room energy meter with PZEM-004T

    A PZEM-004T module with a clamp CT measures voltage, current, power and units used by a room, and shows them on a web page.

    Intermediate3 hSmart HomeOpen the build →
  8. Long-range LoRa sensor link at 866 MHz

    One ESP32 sends BME280 readings over LoRa in India's 865 to 867 MHz band, and a second ESP32 shows them with signal strength on an OLED, often over a kilometre away.

    Advanced2.5 hCommunicationOpen the build →
  9. Cloud AC control with IR

    An ESP32 learns your AC remote and lets you turn the AC on from your phone before you reach home.

    Intermediate3 hIoTOpen the build →
  10. Room presence with BLE beacons

    ESP32s in each room scan for your phone or a tag and report which room you are in.

    Intermediate3 hIoTOpen the build →

Before you start

Every build has the full parts list, wiring table, tested code and troubleshooting. Check the circuit or sketch first in the code space or the circuit builder, then order parts with the Buy at Geekobot links on each project page. ElectroLark does not sell parts.

New to the basics? Take the free iot edge ai course, or browse all projects and final-year project briefs.

IoT projects: common questions

What is the easiest IoT project to start with?

The ThingSpeak weather logger or the Google Sheets logger. Both read a sensor and send it to a free online service you can open on any phone.

What is MQTT and why is it used in IoT?

MQTT is a lightweight publish and subscribe messaging protocol. A device publishes a reading to a topic and any dashboard subscribed to it sees the value, with very little network overhead.

Which board is best for IoT projects?

An ESP32 for most Wi-Fi and Bluetooth projects, a Raspberry Pi for gateways and dashboards, and a LoRa board when you need kilometres of range without Wi-Fi.

Can I do an IoT final-year project with these?

Yes. Each is a good base for a mini or final-year project. Add a second sensor, an alert and a short report with test results to make it your own.

Do I need to pay for a cloud service?

The free tiers of services like ThingSpeak and Google Sheets are enough for these builds. Check each service's current limits.