Idea
In short
How do you build a stair light that follows you?
Two PIR sensors at the ends of a staircase light each step in sequence as you walk, then fade out behind you. You need Arduino Nano, WS2813 / WS2815 12 V addressable strip, AM312 mini PIR motion sensor × 2 and 12 V 2 A DC adapter.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Animate a strip in response to events.
Parts list
- Development Boards
- Optoelectronics
- Sensors
- Power
How to build it
- Mount a strip segment on each step
- Detect direction from the two sensors
- Light the steps in sequence
- Fade out after 20 seconds
- Dim based on the ambient light
Common questions
What parts do I need for the stair light that follows you?
Arduino Nano, WS2813 / WS2815 12 V addressable strip, AM312 mini PIR motion sensor × 2 and 12 V 2 A DC adapter.
How long does the stair light that follows you take to build?
About 150 minutes for a intermediate maker.
