AM312 mini PIR motion sensor
Very small PIR motion sensor that runs on 3.3 V.
MeasuresHuman movement (passive IR)
RangeUp to about 3 to 5 m
InterfaceDigital HIGH on motion
Supply voltage2.7 to 12 V
SensorsReviewedMPN AM312Used in 7 projects
In short
What is the AM312 mini PIR motion sensor and what is it used for?
Very small PIR motion sensor that runs on 3.3 V. Makers use it for battery motion lights.
How it works
A pyroelectric element behind a Fresnel lens senses changes in infrared heat as a warm body moves across its zones.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Human movement (passive IR) |
| Range | Up to about 3 to 5 m |
| Interface | Digital HIGH on motion |
| Supply voltage | 2.7 to 12 V |
Pinout
VCC2.7 to 12 V
OUTDigital, HIGH for about 2 s after motion
GNDGround
How to use it
Connect OUT directly to a 3.3 V or 5 V input. It has no adjustments, so it suits small battery projects where an HC-SR501 is too big.
Applications
Battery motion lights
Builds that use it
Alternatives
- PIR Motion Sensor HC-SR501Larger range with adjustable delay and sensitivity
- RCWL-0516 microwave radar motion sensorWorks through thin plastic covers
Common questions
What is the AM312 mini PIR motion sensor used for?
In maker projects: battery motion lights.
How does the AM312 mini PIR motion sensor work?
A pyroelectric element behind a Fresnel lens senses changes in infrared heat as a warm body moves across its zones.
What voltage does the AM312 mini PIR motion sensor need?
2.7 to 12 V.
How do I connect the AM312 mini PIR motion sensor to an Arduino or ESP32?
Digital HIGH on motion. Pins: VCC (2.7 to 12 V), OUT (Digital, HIGH for about 2 s after motion), GND (Ground).
What can I use instead of the AM312 mini PIR motion sensor?
PIR Motion Sensor HC-SR501 and RCWL-0516 microwave radar motion sensor.
