Idea
In short
How do you build a star ceiling with twinkle?
A few LEDs feed bundles of optical fibre through a ceiling panel, and a colour wheel makes the stars twinkle. You need Arduino Nano, High-power LED 3 W (star) × 2, MOSFET IRLZ44N × 2, SG90 Micro Servo, 12 V 2 A DC adapter, LM2596 Buck Module, Heatsink TO-220 and Resistor 220 Ω × 2.
- Level
- Intermediate
- Time
- About 360 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine light sources, optics and slow animation.
Parts list
- Development Boards
- Optoelectronics
- SemiconductorsMOSFET IRLZ44N × 2
- Motors & ActuatorsTurns a coloured twinkle wheel
- Power
- Power
- Tools & Instruments
- PassivesResistor 220 Ω × 2
How to build it
- Bundle fibres in front of each LED
- Dim each LED with PWM
- Spin a coloured wheel slowly with the servo
- Push fibres through drilled holes
- Fade to off over an hour
Common questions
What parts do I need for the star ceiling with twinkle?
Arduino Nano, High-power LED 3 W (star) × 2, MOSFET IRLZ44N × 2, SG90 Micro Servo, 12 V 2 A DC adapter, LM2596 Buck Module, Heatsink TO-220 and Resistor 220 Ω × 2. SG90 Micro Servo: Turns a coloured twinkle wheel.
How long does the star ceiling with twinkle take to build?
About 360 minutes for a intermediate maker.
