Projects / Ideas / Three addressable strip types compared

Three addressable strip types compared

IntermediateLightingIdeaReviewed
In short

How do you build a three addressable strip types compared?

Run short pieces of three strip types from one board and compare their wiring, timing, colour and current. Keep brightness low. You need Arduino Nano, WS2813 / WS2815 12 V addressable strip, SK6812 RGBW strip, APA102 / SK9822 strip (clocked), 5 V 2 A USB adapter, Electrolytic Capacitor 100 µF and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Compare strip chips.

How to build it

  1. Note each strip's voltage and data lines
  2. Wire the first strip with a resistor
  3. Drive the second
  4. Drive the clocked strip
  5. Compare colour and current

Related projects

Common questions

What parts do I need for the three addressable strip types compared?

Arduino Nano, WS2813 / WS2815 12 V addressable strip, SK6812 RGBW strip, APA102 / SK9822 strip (clocked), 5 V 2 A USB adapter, Electrolytic Capacitor 100 µF and Breadboard 830 Tie Points.

How long does the three addressable strip types compared take to build?

About 240 minutes for a intermediate maker.