Idea
In short
How do you build a robot arm that picks by colour?
A camera above a table finds coloured blocks and a robot arm picks them up and sorts them. You need Raspberry Pi 5, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply, Raspberry Pi Camera Module 3, Robot arm kit 4-DOF (acrylic, SG90), PCA9685 16-channel servo driver and 5 V 2 A USB adapter.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Map camera pixels to robot coordinates.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- SBC Accessories
- Motors & Actuators
- Motor Drivers
- Power
How to build it
- Calibrate camera pixels to table positions
- Find blocks by colour
- Work out joint angles for each block
- Pick and place them
- Repeat until the table is clear
Common questions
What parts do I need for the robot arm that picks by colour?
Raspberry Pi 5, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply, Raspberry Pi Camera Module 3, Robot arm kit 4-DOF (acrylic, SG90), PCA9685 16-channel servo driver and 5 V 2 A USB adapter.
How long does the robot arm that picks by colour take to build?
About 480 minutes for a advanced maker.
