Projects / Ideas / Wired sensor page

Wired sensor page

IntermediateIoTIdeaReviewed
In short

How do you build a wired sensor page?

A wired Ethernet module serves a page with the temperature on your own network only, with no Wi-Fi. Do not expose it to the internet. You need Arduino Uno R3, W5500 Ethernet module, BME280 Environmental Sensor and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Serve a page over Ethernet.

How to build it

  1. Wire the module on SPI
  2. Get an address from the router
  3. Read the sensor
  4. Serve a simple page
  5. Add a refresh

Related projects

Common questions

What parts do I need for the wired sensor page?

Arduino Uno R3, W5500 Ethernet module, BME280 Environmental Sensor and Breadboard 830 Tie Points.

How long does the wired sensor page take to build?

About 210 minutes for a intermediate maker.