Idea
In short
How do you build an MP3 player with a codec chip?
A codec module plays tracks from a card with a play, next and volume button set on a small board. You need Arduino Uno R3, VS1053 MP3 codec module, MicroSD Card Module, Tactile push button 6 mm × 3, Speaker 8 Ω 0.5 W and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a small music player.
Parts list
- Development Boards
- Audio
- Interfaces
- Switches
- Motors & Actuators
- Prototyping
How to build it
- Wire the codec and the card
- Play a test track
- Add next and previous
- Add volume
- Keep the volume modest
Common questions
What parts do I need for the MP3 player with a codec chip?
Arduino Uno R3, VS1053 MP3 codec module, MicroSD Card Module, Tactile push button 6 mm × 3, Speaker 8 Ω 0.5 W and Breadboard 830 Tie Points.
How long does the MP3 player with a codec chip take to build?
About 240 minutes for a intermediate maker.
