VS1053 MP3 codec module
MP3 decoder and recorder board with SD slot.
FunctionAudio codec
Supply voltage5 V module
InterfaceSPI
AudioReviewedMPN VS1053 moduleUsed in 2 projects
In short
What is the VS1053 MP3 codec module and what is it used for?
MP3 decoder and recorder board with SD slot. Makers use it for MP3 players.
How it works
A VLSI audio codec that decodes MP3, AAC and Ogg in hardware.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Audio codec |
| Supply voltage | 5 V module |
| Interface | SPI |
Pinout
XCS XDCSCommand and data chip selects
DREQReady for data
XRSTReset
SCK MOSI MISOSPI
SD CSCard slot
How to use it
Use Adafruit_VS1053 or a similar library. Some cheap boards start in MIDI mode and need a short patch at start-up to switch to MP3 decoding.
Applications
MP3 players
Builds that use it
Alternatives
- DFPlayer Mini MP3 moduleSimpler, serial control
Common questions
What is the VS1053 MP3 codec module used for?
In maker projects: MP3 players.
How does the VS1053 MP3 codec module work?
A VLSI audio codec that decodes MP3, AAC and Ogg in hardware.
What voltage does the VS1053 MP3 codec module need?
5 V module.
How do I connect the VS1053 MP3 codec module to an Arduino or ESP32?
SPI. Pins: XCS XDCS (Command and data chip selects), DREQ (Ready for data), XRST (Reset), SCK MOSI MISO (SPI), SD CS (Card slot).
What can I use instead of the VS1053 MP3 codec module?
DFPlayer Mini MP3 module.
