Idea
In short
How do you build an offline voice commands for lights?
An ESP32-S3 box recognises spoken commands like 'light on' without internet, using Espressif's on-device speech models. You need ESP32-S3-BOX-3, Relay module 2-channel 5 V and 5 V 2 A USB adapter.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Run an on-device speech command model and act on recognised words.
Parts list
- Development Boards
- Interfaces
- Power
How to build it
- Install ESP-IDF and the ESP-Skainet examples
- Flash the command recognition demo
- Edit the command list to your phrases
- Switch relays on recognised commands
- Test in a quiet room and with the fan on
Common questions
What parts do I need for the offline voice commands for lights?
ESP32-S3-BOX-3, Relay module 2-channel 5 V and 5 V 2 A USB adapter.
How long does the offline voice commands for lights take to build?
About 300 minutes for a advanced maker.
