Projects / Ideas / Uno R4 WiFi power logger

Uno R4 WiFi power logger

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build an uno R4 WiFi power logger?

An Arduino Uno R4 WiFi reads an INA219 current monitor and shows voltage, current and power on an OLED, with a local web page for the latest values. Stay within the sensor's voltage and current limits. You need Arduino Uno R4 WiFi, INA219 Current Monitor, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 150 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Log how much power a small project uses.

How to build it

  1. Put the sensor in series with the load
  2. Read bus voltage and current
  3. Compute power
  4. Show the readings on the OLED
  5. Serve the latest values on the local network

Related projects

Common questions

What parts do I need for the uno R4 WiFi power logger?

Arduino Uno R4 WiFi, INA219 Current Monitor, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the uno R4 WiFi power logger take to build?

About 150 minutes for a intermediate maker.