Idea
In short
How do you build a two-wheeler anti-theft alarm with GPS?
An accelerometer notices when a parked bike is moved, sounds a siren and sends its GPS location by SMS. You need Arduino Nano, ADXL345 accelerometer, GPS module NEO-6M, SIM A7670C 4G module, Buzzer 12 V continuous (piezo alarm), LM2596 Buck Module, Relay Module 5V and ABS project box (100 × 60 × 25 mm).
- Level
- Advanced
- Time
- About 300 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a vehicle tracker that sleeps, wakes on motion and reports over GSM.
Parts list
- Development Boards
- Sensors
- Sensors
- Wireless
- Motors & Actuators
- Power
- Interfaces
- Mechanical & Hardware
How to build it
- Power from the bike battery through the buck converter with a fuse
- Arm with a hidden switch
- Wake on an ADXL345 activity interrupt
- Sound the siren and send an SMS with a maps link
- Send a new location every 2 minutes while moving
Common questions
What parts do I need for the two-wheeler anti-theft alarm with GPS?
Arduino Nano, ADXL345 accelerometer, GPS module NEO-6M, SIM A7670C 4G module, Buzzer 12 V continuous (piezo alarm), LM2596 Buck Module, Relay Module 5V and ABS project box (100 × 60 × 25 mm).
How long does the two-wheeler anti-theft alarm with GPS take to build?
About 300 minutes for a advanced maker.
