Idea
In short
How do you build a two OLED sizes compared?
Run a colour 1.5 inch OLED and a large 2.42 inch OLED with the same text and compare brightness, current and readability. You need Raspberry Pi Pico H, 1.5 inch RGB OLED (SSD1351), 2.42 inch OLED (SSD1309), Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compare OLED panels.
Parts list
- Development Boards
- Displays
- Displays
- Tools & Instruments
- Prototyping
How to build it
- Wire the colour OLED
- Draw a test page
- Wire the large OLED
- Draw the same page
- Measure the current of each
Common questions
What parts do I need for the two OLED sizes compared?
Raspberry Pi Pico H, 1.5 inch RGB OLED (SSD1351), 2.42 inch OLED (SSD1309), Digital multimeter and Breadboard 830 Tie Points.
How long does the two OLED sizes compared take to build?
About 180 minutes for a intermediate maker.
