Projects / Ideas / Pico W network time clock

Pico W network time clock

IntermediateDisplaysIdeaReviewed
In short

How do you build a pico W network time clock?

A Pico W gets the time from the internet and shows it on a small display. You need Raspberry Pi Pico H, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 180 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Set a clock from a network time server.

How to build it

  1. Connect to Wi-Fi using placeholders for the name and password
  2. Ask a time server
  3. Handle time zones
  4. Show the time
  5. Re-sync every hour

Related projects

Common questions

What parts do I need for the pico W network time clock?

Raspberry Pi Pico H, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the pico W network time clock take to build?

About 180 minutes for a intermediate maker.