1.5 inch RGB OLED (SSD1351)
Full-colour OLED with deep blacks.
TypeColour OLED
Size1.5 inch
Resolution128 × 128
Driver ICSSD1351
DisplaysReviewedMPN SSD1351 128x128Used in 2 projects
In short
What is the 1.5 inch RGB OLED (SSD1351) and what is it used for?
Full-colour OLED with deep blacks. Makers use it for colour wearables.
How it works
An SSD1351 controller driving a 128 × 128 full-colour OLED.
Key specifications
| Display spec | Value |
|---|---|
| Type | Colour OLED |
| Size | 1.5 inch |
| Resolution | 128 × 128 |
| Driver IC | SSD1351 |
| Interface | SPI |
| Supply voltage | 3.3 V |
Pinout
GNDGround
VCC3.3 V
DINSPI data
CLKSPI clock
CSChip select
DCData or command
RSTReset
How to use it
Use Adafruit_SSD1351. Colour is 16-bit. Avoid showing the same static image for long periods, since OLEDs can burn in.
Applications
Colour wearables
Builds that use it
Alternatives
- 1.54 inch TFT (ST7789, 240x240)Higher resolution IPS
- SSD1306 OLED DisplayMonochrome, cheaper
Common questions
What is the 1.5 inch RGB OLED (SSD1351) used for?
In maker projects: colour wearables.
How does the 1.5 inch RGB OLED (SSD1351) work?
An SSD1351 controller driving a 128 × 128 full-colour OLED.
What voltage does the 1.5 inch RGB OLED (SSD1351) need?
3.3 V.
How do I connect the 1.5 inch RGB OLED (SSD1351) to an Arduino or ESP32?
SPI. Pins: GND (Ground), VCC (3.3 V), DIN (SPI data), CLK (SPI clock), CS (Chip select), DC (Data or command).
What can I use instead of the 1.5 inch RGB OLED (SSD1351)?
1.54 inch TFT (ST7789, 240x240) and SSD1306 OLED Display.
