Projects / Ideas / TVS diode protection demo

TVS diode protection demo

IntermediateLearningIdeaReviewed
In short

How do you build a TVS diode protection demo?

You compare a signal line with and without a TVS diode in a simple clamp circuit. You need TVS diode P6KE6.8A, Resistor 1 kΩ, Resistor 10 kΩ, Potentiometer 10 kΩ, 9 V battery and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 150 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Understand surge protection parts.

How to build it

  1. Read the TVS datasheet
  2. Build the clamp
  3. Apply a ramping voltage from a variable supply
  4. Plot the clamp voltage
  5. Compare with a plain Zener

Related projects

Common questions

What parts do I need for the TVS diode protection demo?

TVS diode P6KE6.8A, Resistor 1 kΩ, Resistor 10 kΩ, Potentiometer 10 kΩ, 9 V battery and Breadboard 830 Tie Points.

How long does the TVS diode protection demo take to build?

About 150 minutes for a intermediate maker.