Projects / Ideas / Transistor pinout and type finder

Transistor pinout and type finder

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a transistor pinout and type finder?

A board probes the three legs of an unknown small transistor in all six orders and reports NPN or PNP and which leg is which. You need Arduino Nano, Resistor 1 kΩ × 3, Resistor 10 kΩ × 3, SSD1306 OLED Display, 2N3904 NPN transistor, PNP Transistor 2N2907 and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Find an unknown transistor's pins.

Parts list

How to build it

  1. Wire each leg to a pin through resistors
  2. Probe the pins in turn
  3. Detect a conduction pattern
  4. Work out the type
  5. Show the pinout

Related projects

Common questions

What parts do I need for the transistor pinout and type finder?

Arduino Nano, Resistor 1 kΩ × 3, Resistor 10 kΩ × 3, SSD1306 OLED Display, 2N3904 NPN transistor, PNP Transistor 2N2907 and Breadboard 830 Tie Points.

How long does the transistor pinout and type finder take to build?

About 210 minutes for a intermediate maker.