Idea
In short
How do you build a tiny boost for a coin cell?
A TPS61023 lifts a single 1.5 V or 3 V cell up to 3.3 V to run a small sensor node. You need TPS61023 boost module, AA alkaline battery, ATtiny85-20PU microcontroller, DHT22 Sensor and Resistor 10 kΩ.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Run electronics from a very low voltage.
Parts list
- Power
- Batteries
- Integrated Circuits
- Sensors
- Passives
How to build it
- Wire the module
- Measure the output
- Run a sensor sketch
- Measure the battery current
- Estimate the days of life
Common questions
What parts do I need for the tiny boost for a coin cell?
TPS61023 boost module, AA alkaline battery, ATtiny85-20PU microcontroller, DHT22 Sensor and Resistor 10 kΩ.
How long does the tiny boost for a coin cell take to build?
About 120 minutes for a intermediate maker.
