Projects / Ideas / Sixteen-LED sequencer bar

Sixteen-LED sequencer bar

IntermediateLightingIdeaReviewed
In short

How do you build a sixteen-LED sequencer bar?

A constant-current driver chip lights sixteen LEDs with smooth fades from just a few Uno pins. You need Arduino Nano, TLC5940 16-channel LED driver, LED 5 mm red × 16, Resistor 2 kΩ and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Drive many LEDs with fades.

Parts list

How to build it

  1. Set the current resistor
  2. Wire the clock and data pins
  3. Light one LED
  4. Add chase patterns
  5. Fade each channel

Related projects

Common questions

What parts do I need for the sixteen-LED sequencer bar?

Arduino Nano, TLC5940 16-channel LED driver, LED 5 mm red × 16, Resistor 2 kΩ and Breadboard 830 Tie Points.

How long does the sixteen-LED sequencer bar take to build?

About 270 minutes for a intermediate maker.