Idea
In short
How do you build a station-memory FM radio?
A tiny FM radio stores four favourite stations on buttons and shows the frequency. You need Arduino Nano, TEA5767 FM radio module, LM386 amplifier module, Speaker 8 Ω 0.5 W, Tactile push button 6 mm × 5, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Save radio presets.
Parts list
- Development Boards
- Audio
- Audio
- Motors & Actuators
- Switches
- Displays
- Prototyping
How to build it
- Wire the radio and amplifier
- Tune with two buttons
- Save a station to a preset
- Recall presets
- Show the frequency
Common questions
What parts do I need for the station-memory FM radio?
Arduino Nano, TEA5767 FM radio module, LM386 amplifier module, Speaker 8 Ω 0.5 W, Tactile push button 6 mm × 5, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the station-memory FM radio take to build?
About 270 minutes for a intermediate maker.
