Idea
In short
How do you build a pocket FM radio?
A TEA5767 module and a small amplifier make a tuner with preset stations and a display. You need Arduino Nano, TEA5767 FM radio module, LM386 amplifier module, Speaker 8 Ω 0.5 W, Rotary encoder module (KY-040) and 16x2 LCD with I2C backpack (PCF8574).
- Level
- Beginner
- Time
- About 90 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a radio chip over I2C.
Parts list
- Development Boards
- Audio
- Audio
- Motors & Actuators
- Sensors
- Displays
How to build it
- Wire the radio on I2C
- Tune with the encoder
- Show the frequency
- Store presets
- Use headphone cable as the aerial
Common questions
What parts do I need for the pocket FM radio?
Arduino Nano, TEA5767 FM radio module, LM386 amplifier module, Speaker 8 Ω 0.5 W, Rotary encoder module (KY-040) and 16x2 LCD with I2C backpack (PCF8574).
How long does the pocket FM radio take to build?
About 90 minutes for a beginner maker.
