Idea
In short
How do you build an extra RAM audio sampler?
A 1 Mbit SPI SRAM gives an Arduino enough memory to record and play back a few seconds of sound. You need Arduino Nano, 23LC1024 SPI SRAM, MAX4466 microphone module, MCP4725 12-bit DAC module, Speaker 8 Ω 0.5 W, LM386 amplifier module and Tactile push button 6 mm × 2.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Add external RAM to a small microcontroller.
Parts list
- Development Boards
- Integrated Circuits
- Sensors
- Integrated Circuits
- Motors & Actuators
- Audio
- Switches
How to build it
- Wire the SRAM over SPI
- Sample the mic into it
- Play back through the DAC
- Add loop and speed control
- Check the sample rate
Common questions
What parts do I need for the extra RAM audio sampler?
Arduino Nano, 23LC1024 SPI SRAM, MAX4466 microphone module, MCP4725 12-bit DAC module, Speaker 8 Ω 0.5 W, LM386 amplifier module and Tactile push button 6 mm × 2.
How long does the extra RAM audio sampler take to build?
About 150 minutes for a intermediate maker.
