Idea
In short
How do you build a stereo desk amplifier?
A TDA7297 board gives 15 W per channel for a pair of desk speakers, from a 12 V supply with a volume pot. You need TDA7297 2 × 15 W amplifier board, Speaker 8 Ω 0.5 W × 2, Potentiometer 50 kΩ dual (stereo), 12 V 2 A DC adapter, Audio jack 3.5 mm (PCB, stereo) and Electrolytic capacitor 1000 µF.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Power a small stereo amplifier safely.
Parts list
- Audio
- Motors & Actuators
- Passives
- Power
- Connectors
- Passives
How to build it
- Wire the supply and decoupling
- Add the stereo volume pot
- Connect the speakers
- Check for heating and add airflow
- Add a mute switch
Common questions
What parts do I need for the stereo desk amplifier?
TDA7297 2 × 15 W amplifier board, Speaker 8 Ω 0.5 W × 2, Potentiometer 50 kΩ dual (stereo), 12 V 2 A DC adapter, Audio jack 3.5 mm (PCB, stereo) and Electrolytic capacitor 1000 µF.
How long does the stereo desk amplifier take to build?
About 120 minutes for a intermediate maker.
