Idea
In short
How do you build a class AB audio power board?
A power amplifier chip on a heatsink drives a bookshelf speaker from a low-voltage supply, with the heat measured. You need TDA2030 audio amplifier, Speaker 8 Ω 0.5 W, Electrolytic capacitor 1000 µF × 2, Electrolytic capacitor 10 µF, Resistor 10 kΩ × 2, Potentiometer 10 kΩ, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a larger audio amplifier and manage its heat.
Parts list
- Integrated Circuits
- Motors & Actuators
- Passives
- Passives
- PassivesResistor 10 kΩ × 2
- Passives
- Power
- Prototyping
How to build it
- Read the datasheet for the supply and heatsink
- Build on perfboard
- Add input and feedback networks
- Measure heat under load
- Add a speaker protection delay
Common questions
What parts do I need for the class AB audio power board?
TDA2030 audio amplifier, Speaker 8 Ω 0.5 W, Electrolytic capacitor 1000 µF × 2, Electrolytic capacitor 10 µF, Resistor 10 kΩ × 2, Potentiometer 10 kΩ, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
How long does the class AB audio power board take to build?
About 360 minutes for a advanced maker.
