Idea
In short
How do you build a bitcrusher tone toy?
A sine tone is played through a small speaker, and two knobs reduce its number of bits and its sample rate so you hear it turn gritty like an old video game. A great way to hear what bit depth and sample rate really mean. Keep the volume low. You need Arduino Nano, Potentiometer 10 kΩ × 2, Resistor 1 kΩ, Ceramic Capacitor 100 nF, LM386 amplifier module, Speaker 8 Ω 0.5 W, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 100 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Hear what lower bit depth and sample rate do.
Parts list
- Development Boards
- Passives
- Passives
- Passives
- Audio
- Motors & Actuators
- Prototyping
- Prototyping
How to build it
- Store a sine table in memory
- Play it with fast PWM and a simple filter
- Round each value to fewer bits
- Play it back at a lower sample rate
- Compare the sound at each setting
Related projects
Common questions
What parts do I need for the bitcrusher tone toy?
Arduino Nano, Potentiometer 10 kΩ × 2, Resistor 1 kΩ, Ceramic Capacitor 100 nF, LM386 amplifier module, Speaker 8 Ω 0.5 W, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the bitcrusher tone toy take to build?
About 100 minutes for a intermediate maker.
