Idea
In short
How do you build a colour name guesser?
A colour sensor reads the red, green and blue levels of a card and the board guesses the nearest colour name. You need Arduino Nano, Color sensor TCS3200 / TCS230, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Guess a colour from sensor values.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
- Prototyping
How to build it
- Wire the sensor and its filter pins
- Read the three colour counts
- Calibrate on white and black
- Match against a small colour table
- Show the name
Common questions
What parts do I need for the colour name guesser?
Arduino Nano, Color sensor TCS3200 / TCS230, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the colour name guesser take to build?
About 150 minutes for a beginner maker.
