Projects / Ideas / Quiet microstepping lab

Quiet microstepping lab

IntermediateMotionIdeaReviewed
In short

How do you build a quiet microstepping lab?

A stepper driver with settable microsteps turns a small flat stepper smoothly, and you compare full, half and sixteenth steps for noise and smoothness. You need Arduino Nano, TB6600 stepper driver, NEMA 17 pancake stepper (20 mm), 12 V 2 A DC adapter and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Compare microstep settings.

Parts list

How to build it

  1. Set the current and steps on the switches
  2. Wire step and direction
  3. Turn one revolution
  4. Try each microstep setting
  5. Compare noise

Related projects

Common questions

What parts do I need for the quiet microstepping lab?

Arduino Nano, TB6600 stepper driver, NEMA 17 pancake stepper (20 mm), 12 V 2 A DC adapter and Breadboard 830 Tie Points.

How long does the quiet microstepping lab take to build?

About 240 minutes for a intermediate maker.