Components / Motors and drivers / TB6600 stepper driver

TB6600 stepper driver

Boxed stepper driver for NEMA 23 motors.

FunctionBipolar stepper driver with DIP switches
Supply voltage9 to 42 V
InterfaceOptically isolated STEP, DIR, ENA
RatingUp to 4 A
Motor DriversReviewedMPN TB6600Used in 1 project
In short

What is the TB6600 stepper driver and what is it used for?

Boxed stepper driver for NEMA 23 motors. Makers use it for CNC routers.

How it works

An optically isolated chopper stepper driver for NEMA 17 and NEMA 23 motors.

Key specifications

Interface module specValue
FunctionBipolar stepper driver with DIP switches
Supply voltage9 to 42 V
InterfaceOptically isolated STEP, DIR, ENA
RatingUp to 4 A

Pinout

PUL+ PUL-Step input (optocoupled)
DIR+ DIR-Direction
ENA+ ENA-Enable
A+ A- B+ B-Motor coils
VCC GND9 to 42 V DC
S1 to S3Microstep switches
S4 to S6Current switches

How to use it

Wire PUL-, DIR- and ENA- to GND and PUL+ and DIR+ to the board's pins (or leave ENA unconnected). Set the current switches to the motor's rated current. Many units contain a TB67S109 chip instead, so treat 4 A as a peak.

Applications

Alternatives

Buy at

Common questions

What is the TB6600 stepper driver used for?

In maker projects: CNC routers.

How does the TB6600 stepper driver work?

An optically isolated chopper stepper driver for NEMA 17 and NEMA 23 motors.

What voltage does the TB6600 stepper driver need?

9 to 42 V.

How do I connect the TB6600 stepper driver to an Arduino or ESP32?

Optically isolated STEP, DIR, ENA. Pins: PUL+ PUL- (Step input (optocoupled)), DIR+ DIR- (Direction), ENA+ ENA- (Enable), A+ A- B+ B- (Motor coils), VCC GND (9 to 42 V DC), S1 to S3 (Microstep switches).

What can I use instead of the TB6600 stepper driver?

DM542 stepper driver and DRV8825 stepper driver.